Dell PowerConnect B-RX - Multicast (IP)

1354 BigIron RX Series Configuration Guide
53-1002253-01
Multicast (IP)
E
Multicast (IP)
show mstp <instance-number> “Displaying MSTP statistics” on page 1059
show xstp ethernet <slot/port> “Displaying MSTP information for the specified
Ethernet interface” on page 1062
show mstp [<mstp-id> | configuration | detail] [ | begin
<string> | exclude <string> | include <string>]
Enter an MSTP ID for <mstp-id>
“Displaying MSTP statistics” on page 1059
“Displaying MSTP information for a specified
instance” on page 1060
“Displaying MSTP information for CIST instance 0” on
page 1061
Commands See ...
Commands See ...
bsr-candidate ethernet <portnum> | loopback <num> |
ve <num>
<hash-mask-length> [<priority>]
“Configuring BSRs” on page 609
clear pim rp-map “Configuring RPs” on page 609
default-gateway <ip-addr> “Modifying default route” on page 653
disable-dvmrp “Globally enabling or disabling DVMRP without
deleting multicast configuration” on page 651
graft-retransmit-time <5-3600> “Modifying graft retransmit time” on page 653
graft-retransmit-timer <10-3600> “Modifying graft retransmit timer” on page 604
hello-timer <10-3600> “Modifying hello timer” on page 603
inactivity-timer <10-3600> “Modifying inactivity timer” on page 604
ip dvmrp “Enabling DVMRP on an interface” on page 651
ip dvmrp metric <1-31> | ttl-threshold <1-64> |
[advertise-local on | off ]
“Modifying the metric” on page 654
“Modifying the TTL” on page 654
“Enabling advertising” on page 654
ip igmp group-membership-time <1-7200> “Modifying IGMP (V1 and V2) membership time” on
page 585
ip igmp max-response-time <num> “Modifying IGMP (V1 and V2) maximum response
time” on page 586
ip igmp query-interval <1-3600> “Modifying IGMP (V1 and V2) query interval period”
on page 585
ip igmp static-group <ip-addr> [ethernet <portnum>] “Adding an interface to a multicast group” on
page 586
ip multicast-routing “Changing IGMP V1 and V2 parameters” on
page 585
ip pim [version 1 | 2] “Enabling a PIM version” on page 602
ip pim border p. 23-16
ip pim ttl <1-64> “Modifying the TTL” on page 605
ip pim-sparse “Configuring PIM interface parameters” on page 608