Dell PowerConnect B-RX - Displaying PIM Sparse Configuration Information and Statistics

BigIron RX Series Configuration Guide 1259
53-1002253-01
IPv6 PIM sparse
49
Syntax: show ipv6 pim sparse
Displaying PIM sparse configuration information and
statistics
You can display the following PIM Sparse information:
• Basic PIM Sparse configuration information
• Group information
• BSR information
• Candidate RP information
• RP-to-group mappings
• RP information for a IPv6 PIM Sparse group
• RP set list
• IPv6 PIM Neighbor information
• The IPv6 PIM flow cache
• The IPv6PIM multicast cache
• IPv6 PIM traffic statistics
• IPv6 PIM counter statistics
Displaying basic PIM sparse configuration information
To display IPv6 PIM Sparse configuration information, enter the following command at any CLI level.
Syntax: show ipv6 pim sparse
This display shows the following information.
BigIron RX#show ipv6 pim sparse
Global PIM Sparse Mode Settings
Hello interval : 30 Neighbor timeout : 105
Bootstrap Msg interval: 60 Candidate-RP Advertisement interval: 60
Join/Prune interval : 60 SPT Threshold : 1
SSM Enabled: Yes
SSM Group Range: ff30::/12
Hardware Drop Enabled : Yes
BigIron RX#show ipv6 pim sparse
Global PIM Sparse Mode Settings
Hello interval : 30 Neighbor timeout : 105
Bootstrap Msg interval : 60 Candidate-RP Advertisement interval: 60
Register Suppress interval: 60 Register Stop Delay : 60
Join/Prune interval : 60 SPT Threshold : 1
Inactivity interval : 180 Hardware Drop Enabled : Yes
SSM Enabled : Yes