1378 BigIron RX Series Configuration Guide
53-1002253-01
LAG
E
LAG
member-vlan <vlan-id> “Configuring a topology group” on page 449
show topology-group [<group-id>] “Displaying topology group information” on page 449
topology-group <group-id> “Configuring a topology group” on page 449
Commands See ...
Commands See ...
lag <lag-name> static | dynamic | keep-alive “Creating a Link Aggregation Group (LAG)” on
page 241
ports ethernet <slot/port> [ to <slot/port> ] [ ethernet
<slot/port> ]
“Creating a Link Aggregation Group (LAG)” on
page 241
primary port <slot/port> “Configuring the primary port for a LAG” on page 242
trunk-threshold <number> “Specifying the trunk threshold for a trunk Group” on
page 242
lacp-port-priority <slot/port> <number> “Configuring LACP port priority” on page 243
lacp-timeout [long | short] “Configuring an LACP timeout” on page 243
deploy [ forced | passive ] “Deploying a LAG” on page 244
acl-mirror-port ethe-port-monitored [slot/port] |
named-port-monitored [name]
“Configuring ACL-based mirroring” on page 245
disable ethernet [slot/port] | named [name] “Disabling ports within a LAG” on page 245
enable ethernet [slot/port] | named [name] “Enabling ports within a LAG” on page 245
monitor ethe-port-monitored [slot/port] |
named-port-monitored [name] ethernet [slot/port] [ input
| output | both ]
“Monitoring an individual LAG port” on page 246
port-name <text> ethernet <slot>/<portnum> “Assigning a name to a port within a LAG” on
page 246
sflow-forwarding ethernet [slot/port] | port-name [text] “Enabling sFlow forwarding on a port within a LAG” on
page 246
sflow-subsampling ethernet [slot/port] | port-name [text]
<num>
“Setting the sFlow sampling rate for a port within a
LAG” on page 247
show lag <lag-name> [brief] [deployed] [dynamic]
[keep-alive] [static]
“Displaying LAG information” on page 247
show statistics [brief] lag [<lag-name>] “Displaying LAG information” on page 247
threshold <number> “Specifying the trunk threshold for a trunk Group” on
page 242
To Next Page
Loading...
