Dell PowerConnect B-RX - Ssh; Sflow

1374 BigIron RX Series Configuration Guide
53-1002253-01
SSH
E
SSH
sFlow
Commands See ...
clear public-key “Importing authorized public keys into the device” on
page 917
crypto key generate | zeroize “Generating a host key pair” on page 915
ip ssh authentication-retries <number> “Setting the number of SSH authentication retries”
on page 918
ip ssh idle-time <minutes> “Configuring maximum idle time for SSH sessions”
on page 920
ip ssh key-authentication no | yes “Enabling DSA challenge-response authentication”
on page 918
ip ssh password-authentication no | yes “Deactivating user authentication” on page 918
ip ssh permit-empty-passwd no | yes “Enabling empty password logins” on page 919
ip ssh port <number> “Setting the SSH port number” on page 919
ip ssh pub-key-file tftp I <tftp-server-ip-addr> <filename>
[remove]
“Importing authorized public keys into the device” on
page 917
ip ssh scp disable | enable “Using secure copy” on page 922
ip ssh source-interface ethernet <slot/port> | loopback
<num> | ve <num>
“Designating an interface as the source for all SSH
packets” on page 920
ip ssh timeout <seconds> “Setting the SSH login timeout value” on page 920
kill ssh <connection-id> “Displaying SSH connection information” on
page 921
show ip client-pub-key [begin<expression> | exclude
<expression> | include <expression>]
“Importing authorized public keys into the device” on
page 917
show ip ssh [begin <expression> | exclude <expression> |
include <expression>]
“Displaying SSH connection information” on
page 921
show who [begin<expression> | exclude<expression> |
include<expression>]
“Displaying SSH connection information” on
page 921
ssh access-group <standard-named-acl> |
<standard-numbered-acl>
“Filtering SSH access using ACLs” on page 921
ssh no-show-host-keys “Generating a host key pair” on page 915
ssh show-host-keys “Generating a host key pair” on page 915
Commands See ...
clear statistics “Clearing sFlow statistics” on page 1048
sflow destination <ip-addr> [<dest-udp-port>] “Specifying the collector” on page 1041
sflow enable “Enabling sFlow forwarding” on page 1043
sflow forwarding “Enabling sFlow forwarding” on page 1043