Dell PowerConnect B-RX - Multicast (L2); OSPF Version 4

1356 BigIron RX Series Configuration Guide
53-1002253-01
Multicast (L2)
E
Multicast (L2)
OSPF version 4
spt-threshold infinity | <num> “Changing the Shortest Path Tree (SPT) threshold” on
page 614
system-max dvmrp-mcache <num> “Defining the maximum number of DVMRP cache
entries” on page 582
system-max pim-mcache <num> “Defining the maximum number of PIM cache
entries” on page 582
trigger-interval <5-30> “Modifying trigger interval” on page 653
Commands See ...
Commands See ...
clear ip multicast all | group <group-id> “Clearing IGMP group flows” on page 1077
clear ip multicast statistics “Clearing IP multicast statistics” on page 1077
ip multicast [active | passive] “Enabling IP multicast traffic reduction” on
page 1066
“Changing the IGMP mode” on page 1067
“Enabling PIM SM traffic snooping” on page 1074
ip multicast age-interval <interval> “Modifying the age interval” on page 1068
ip multicast filter “Filtering multicast groups” on page 1068
ip multicast query-interval <interval> “Modifying the query interval” on page 1068
ip pimsm-snooping “Enabling PIM SM traffic snooping” on page 1074
show ip multicast igmp-snooping “Displaying multicast information” on page 1075
show ip multicast pimsm-snooping “Displaying multicast information” on page 1075
show ip multicast statistics “Displaying IP multicast statistics” on page 1076
show ip multicast “Enabling IP multicast traffic reduction” on
page 1066
Commands See ...
area <num> | <ip-addr> nssa <cost> |
default-information-originate
“Configuring an NSSA” on page 690
area <num> | <ip-addr> range <ip-addr> <ip-mask>
[advertise | not-advertise]
“Configuring an address range for the NSSA” on
page 690
“Assigning an area range (optional)” on page 691
area <num> | <ip-addr> stub <cost> [no-summary] “Assign a totally stubby area” on page 688