Dell PowerConnect B-RX - Ipv6 BGP4

1342 BigIron RX Series Configuration Guide
53-1002253-01
IPv6 BGP4+
E
IPv6 BGP4+
Commands See ...
aggregate-address <ipv6-prefix>/<prefix-length> [as-set]
[summary-only] [suppress-map <map-name>]
[advertise-map <map-name>] [attribute-map
<map-name>]
“Aggregating routes advertised to BGP4 neighbors”
on page 1137
clear ip bgp routes [<ipv6-prefix>/<prefix-length>] “Clearing and resetting BGP4+ routes in the IPv6
route table” on page 1142
clear ipv6 bgp dampening [<ipv6-prefix>/<prefix-length>] “Removing route flap dampening” on page 1138
clear ipv6 bgp flap-statistics
[<ipv6-prefix>/<prefix-length> | neighbor <ipv6-address>
|
regular-expression <regular-expression>]
“Clearing route flap dampening statistics” on
page 1139
clear ipv6 bgp local routes “Clearing BGP4+ neighbor diagnostic buffers” on
page 1140
clear ipv6 bgp neighbor <ipv6-address> |
<peer-group-name> [soft in prefix-filter]
“Resetting a BGP4+ neighbor session to send and
receive ORFs” on page 1140
clear ipv6 bgp neighbor <ipv6-address> flap-statistics “Clearing BGP4+ neighbor route flap dampening
statistics” on page 1142
clear ipv6 bgp neighbor all | <ipv6-address> |
<peer-group-name> | <as-number> [soft-outbound | soft
[in | out]]
“Clearing and resetting BGP4+ routes in the IPv6
route table” on page 1142
clear ipv6 bgp neighbor all | <ipv6-address> |
<peer-group-name> | <as-number> traffic
“Clearing BGP4+ neighbor diagnostic buffers” on
page 1140
clear ipv6 bgp neighbor all | <ipv6-address> |
<peer-group-name> | <as-number>
last-packet-with-error | notification-errors
“Clearing BGP4+ neighbor diagnostic buffers” on
page 1140
clear ipv6 bgp traffic “Clearing BGP4+ neighbor traffic counters” on
page 1142
default-information-originate “Advertising the default BGP4+ route”
on page 1135
local-as <number> “Enabling BGP4+” on page 1131
match ipv6 address prefix-list <name> “Configuring a route map” on page 1133
neighbor <ipv6-address> default-originate [route-map
<name>]
“Assigning IPv6 neighbor to peer group” on
page 1135
neighbor <ipv6-address> peer-group <peer-group-name> “Assigning IPv6 neighbor to peer group” on
page 1135
neighbor <ipv6-address> remote-as <as-number> “Adding a neighbor to a local router” on page 1134
neighbor <ipv6-address> remote-as <as-number> “Adding BGP4+ neighbors using link-local addresses”
on page 1132
neighbor <ipv6-address> remote-as <as-number> “Adding a neighbor to a local router” on page 1134
neighbor <ipv6-address> route-map [in | out] <name> “Configuring a route map” on page 1133
neighbor <ipv6-address> update-source <ipv4-address> |
ethernet <port> | loopback <number> | ve <number>
“Identifying a neighbor interface” on page 1133