22 BigIron RX Series Configuration Guide
53-1002253-01
Logging on through the Web Management Interface
2
• %
• '
• -
• _
• @
• ~
• `
• !
• (
• )
• {
• }
• ^
• #
• &
Logging on through the Web Management Interface
To use the Web Management Interface, open a Web browser and enter the IP address of a BigIron
RX Series Switch’s management port in the Location or Address field. The Web browser contacts
the device and displays the login panel for the BigIron RX Series Switch, as shown in Figure 1.
FIGURE 1 Web Management Interface login panel
If you are unable to connect with the device through a Web browser due to a proxy problem, it may
be necessary to set your Web browser to direct Internet access instead of using a proxy. For
information on how to change a proxy setting, refer to the on-line help provided with your Web
browser.
To log in, click on the Login link. Figure 2 shows the dialog box that displays.