Dell PowerConnect B-RX - Displaying the WRED Configuration

BigIron RX Series Configuration Guide 493
53-1002253-01
Configuring packet drop priority using WRED
18
Displaying the WRED configuration
To view a WRED configuration, use the following command.
Syntax: show qos wred
TABLE 97 WRED default settings
Queue
type
Drop
precedence
Minimum
average
queue size
(KByte)
Maximum
average
queue size
(KByte)
Maximum
packet size
(Byte)
Maximum
drop
probability
Maximum
instantaneous
queue size
Average
weight
0 0 356 1024 16384 2% 1024 0.2%
1 304 1024 16384 4%
2 256 1024 16384 9%
3 204 1024 16384 10%
10 356 1024 16384 2% 1024 0.2%
1 304 1024 16384 4%
2 256 1024 16384 9%
3 204 1024 16384 10%
2 0 408 1024 16384 2% 1024 0.2%
1 356 1024 16384 4%
2 304 1024 16384 9%
3 256 1024 16384 9%
3 0 408 1024 16384 2% 1024 0.2%
1 356 1024 16384 4%
2 304 1024 16384 9%
3 256 1024 16384 9%
BigIron RX#show qos wred
QType Enable AverWt MaxQSz DropPrec MinAvgQSz MaxAvgQSz MaxDropProb MaxPktSz
0 Yes 100% 32768 0 16000 32000 30% 512
1 32768 32768 0% 512
2 32768 32768 100% 512
3 32768 32768 0% 512
1 Yes 100% 32768 0 32768 32768 0% 512
1 32768 32768 0% 512
2 24000 24000 50% 512
3 32768 32768 0% 512
2 No
3 No