Dell PowerConnect B-RX - Metro Ring; Mstp

BigIron RX Series Configuration Guide 1353
53-1002253-01
Metro Ring
E
Metro Ring
MSTP
Commands See ...
diagnostics “Enabling MRP diagnostics” on page 418
enable “Configuring MRP with shared interfaces” on
page 417
hello-time <ms> “Changing the hello and preforwarding times” on
page 412
master “Adding an MRP ring to a VLAN” on page 411
metro-ring <ring-id> “Adding an MRP ring to a VLAN” on page 411
name <string> “Adding an MRP ring to a VLAN” on page 411
preforwarding-time <ms> “Changing the hello and preforwarding times” on
page 412
ring-interface
ethernet <primary-if> ethernet <secondary-if>
“Adding an MRP ring to a VLAN” on page 411
show metro [<ring-id>] “Displaying ring information” on page 420
show metro <ring-id> diag “Enabling MRP diagnostics” on page 418
show topology-group [<group-id>] “Displaying topology group information” on page 419
Commands See ...
mstp name <name> “Setting the MSTP name” on page 1053
mstp revision <revision-number> “Setting the MSTP revision number” on page 1053
mstp instance <instance-number> [ vlan <vlan-id> |
vlan-group <group-id>
“Configuring an MSTP instance” on page 1054
mstp instance <instance-number> ethernet <slot/port>
priority <port-priority> path-cost <cost>
“Configuring port priority and port path cost” on
page 1054
mstp instance <instance-number> priority <priority-value> “Configuring bridge priority for an MSTP instance” on
page 1054
mstp force-version <mode-number> forward-delay
<value> hello-time <value> max-age <value> max-hops
<value>
“Setting the MSTP global parameters” on page 1055
mstp admin-edge-port ethernet <slot/port> “Setting ports to be operational edge ports” on
page 1055
mstp admin-pt2pt-mac ethernet <slot/port> “Setting point-to-point link” on page 1055
mstp disable <slot/port> “Disabling MSTP on a port” on page 1056
mstp force-migration-check ethernet <slot/port> “Forcing ports to transmit an MSTP BPDU” on
page 1056
start “Enabling MSTP on a switch” on page 1056