Dell PowerConnect B-RX - Displaying OSPF Information; Displaying General OSPF Configuration Information

720 BigIron RX Series Configuration Guide
53-1002253-01
Displaying OSPF information
25
Displaying OSPF information
You can display the following OSPF information:
• Trap, area, and interface information – refer to “Displaying general OSPF configuration
information” on page 720.
• CPU utilization statistics – refer to “Displaying CPU utilization and other OSPF tasks” on
page 721.
• Area information – refer to “Displaying OSPF area information” on page 723.
• Neighbor information – refer to “Displaying OSPF neighbor information” on page 724.
• Interface information – refer to “Displaying OSPF interface information” on page 725.
• Route information – refer to “Displaying OSPF route information” on page 727.
• External link state information – refer to “Displaying OSPF external link state Information” on
page 729.
• Link state information – refer to “Displaying OSPF database link state information” on
page 730.
• Virtual Neighbor information – refer to “Displaying OSPF virtual neighbor and link information”
on page 732.
• Virtual Link information – refer to “Displaying OSPF virtual link information” on page 734.
• ABR and ASBR information – refer to “Displaying OSPF ABR and ASBR information” on
page 731.
• Trap state information – refer to “Displaying OSPF trap status” on page 732.
Displaying general OSPF configuration information
To display general OSPF configuration information, enter the following command at any CLI level.