Dell PowerConnect B-RX - Is-Is

1350 BigIron RX Series Configuration Guide
53-1002253-01
IS-IS
E
IS-IS
redistribute bgp | connected | isis | rip | static [route-map
<map-name>]
“Redistributing routes into OSPFv3” on page 1216
show ipv6 ospf area [<area-id>] “Displaying OSPFv3 area information” on page 1227
show ipv6 ospf database [advrtr <ipv4-address> |
as-external | extensive | inter-prefix | inter-router |
intra-prefix | link | link-id <number> | network | router
[scope <area-id> | as | link]]
“Displaying OSPFv3 database Information” on
page 1228
show ipv6 ospf interface [ethernet <port> | loopback
<number> | tunnel <number> | ve <number>]
“Displaying OSPFv3 interface information” on
page 1234
show ipv6 ospf memory “Displaying OSPFv3 memory usage” on page 1237
show ipv6 ospf neighbor [router-id <ipv4-address>] “Displaying OSPFv3 neighbor information” on
page 1238
show ipv6 ospf redistribute route [<ipv6-prefix>] “Displaying routes redistributed into OSPFv3” on
page 1240
show ipv6 ospf routes [<ipv6-prefix>] “Displaying OSPFv3 route information” on page 1241
show ipv6 ospf spf node area [<area-id>] “Displaying OSPFv3 SPF information” on page 1243
show ipv6 ospf spf table area <area-id> “Displaying OSPFv3 SPF information” on page 1243
show ipv6 ospf spf tree area <area-id> “Displaying OSPFv3 SPF information” on page 1243
show ipv6 ospf virtual-link “Displaying IPv6 OSPF virtual link information” on
page 1246
show ipv6 ospf virtual-neighbor “Displaying IPv6 OSPF virtual link information” on
page 1246
summary-address <ipv6-prefix>/<prefix-length> “Configuring external route summarization” on
page 1219
timers lsa-group-pacing <seconds> “Configuring the OSPFv3 LSA pacing interval” on
page 1225
timers spf <delay> <hold-time> “Modifying shortest path first timers” on page 1223
virtual-link-if-address interface ethernet <port> | loopback
<number> | tunnel <number>
| ve <number>
“Assigning a virtual link source address” on
page 1213
Commands See ...
Commands See ...
address-family ipv4 unicast “Address family configuration level” on page 872
area-password <string> “Configuring an area password” on page 875
clear isis all | counts | neighbor | route | traffic “Clearing IS-IS information” on page 902
csnp-interval <secs> “Changing the sequence numbers PDU interval” on
page 876
default-information-originate [route-map <name>] “Enabling advertisement of a default route” on
page 880