514 BigIron RX Series Configuration Guide
53-1002253-01
Displaying traffic reduction
19
Displaying traffic reduction
The show rate-limit command displays the rate limiting policies configured on the ports. For
example.
To display bytes forwarded and dropped, enter the following command.
The byte count includes the preamble and the minimum inter-frame gap in Ethernet.
To display rate limiting policies for an interface that includes counters, enter the following
command.
To display the rate limiting policies on interface 1/3, enter the following command.
To display rate-limit VLAN groups, enter the following.
Syntax: show rate-limit [counters [interface <slot/port>]] [group [<vlan-number>]] [interface
<slot/port>]
The counters parameter displays bytes forwarded and dropped by the interfaces that have a
rate-limiting policy. <slot/port> specifies a particular interface.
The group <vlan-number> parameter indicates the rate limiting VLAN group for which the
rate-limiting policy is created.
interface <slot/port> displays the rate limiting policy for a particular interface.
BigIron RX(config)# show rate-limit
interface e 1/1
rate-limit input 499321856 750000000
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
rate-limit input vlan-id 20 97523712 200000000
BigIron RX(config)# show rate-limit counters
interface e 1/1
rate-limit input 499321856 750000000
Bytes fwd: 440 Bytes drop: 20 Total: 460
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
Bytes fwd: 0 Bytes drop: 0 Total: 0
rate-limit input vlan-id 20 97523712 200000000
Bytes fwd: 0 Bytes drop: 0 Total: 0
BigIron RX(config)# show rate-limit counters interface 1/1
interface e 1/1
rate-limit input 499321856 750000000
Bytes fwd: 440 Bytes drop: 20 Total: 460
BigIron RX(config)# show rate-limit interface 1/3
interface e 1/3
rate-limit input vlan-id 10 499321856 750000000
rate-limit input vlan-id 20 97523712 200000000
BigIron RX(config)# show rate-limit group
rl-vlan-group 10
vlan 3 5 to 7
To Next Page
Loading...
