Dell PowerConnect B-RX - Fdp;Cdp

1338 BigIron RX Series Configuration Guide
53-1002253-01
FDP/CDP
E
FDP/CDP
IP
snmp-server enable traps bgp “Generating traps for BGP” on page 816
timers keep-alive <num> hold-time <num> “Changing the keep alive time and hold time” on
page 789
update-time <secs> “Changing the BGP4 next-hop update timer” on
page 790
Commands See ...
Commands See ...
cdp enable “Enabling interception of CDP packets on an
interface” on page 1028
cdp run “Enabling interception of CDP packets globally” on
page 1028
clear fdp counters “Clearing FDP and CDP statistics” on page 1027
“Clearing CDP information” on page 1030
clear fdp table “Clearing FDP and CDP neighbor information” on
page 1027
fdp enable “Enabling FDP at the interface level” on page 1024
fdp holdtime <secs> “Changing the FDP hold time” on page 1024
fdp run “Enabling FDP globally” on page 1023
fdp timer <secs> “Changing the FDP update timer” on page 1024
show fdp entry * | <device-id> “Displaying FDP entries” on page 1026
“Displaying CDP entries” on page 1029
show fdp interface [ethernet <slot>/<portnum>] “Displaying FDP information for an interface” on
page 1026
show fdp neighbor [ethernet<slot>/<portnum>] [detail] “Displaying neighbor information” on page 1025
show fdp neighbors [detail | ethernet <portnum>] “Displaying neighbors” on page 1028
show fdp traffic “Displaying FDP and CDP statistics” on page 1027
“Displaying CDP statistics” on page 1030
Commands See ...
arp <ip-addr> <mac-addr> ethernet <slot/port> “Creating static ARP entries” on page 191
bootp-relay-max-hops <1-15> “Changing the maximum number of hops to a BootP
relay server” on page 220
clear ip route [<ip-addr> <ip-mask> |
<ip-addr>/<mask-bits>]
“Clearing IP routes” on page 231
default-mtu <num> “Globally changing the IP MTU” on page 182