1362 BigIron RX Series Configuration Guide
53-1002253-01
RMON
E
RMON
distance <num> “Changing the administrative distance” on page 670
ip prefix-list <name> permit | deny <source-ip-address> |
any <source-mask> | any
“Using prefix lists and route maps as route filters” on
page 674
ip rip learn-default “Configuring route learning and advertising
parameters” on page 672
ip rip metric-offset <num> in | out “Changing the cost of routes learned or advertised on
a port” on page 670
ip rip poison-reverse “Changing the route loop prevention method” on
page 673
ip rip prefix-list <name> in | out “Using prefix lists and route maps as route filters” on
page 674
ip rip route-map <name> in | out “Using prefix lists and route maps as route filters” on
page 674
ip rip v1-only | v1-compatible-v2 | v2-only “Enabling RIP” on page 669
learn-default “Configuring route learning and advertising
parameters” on page 672
neighbor <filter-num> permit | deny <source-ip-address>
| any
“Configuring a RIP neighbor filter” on page 673
poison-local-routes “Changing the route loop prevention method” on
page 673
poison-reverse “Changing the route loop prevention method” on
page 673
prefix-list <name> in | out “Using prefix lists and route maps as route filters” on
page 674
redistribute connected | bgp | ospf | static [metric
<value> | route-map <name>]
“Configuring redistribution filters” on page 671
router rip “Enabling RIP” on page 669
show ip rip “Displaying RIP filters” on page 676
timers <seconds> “Setting RIP timers” on page 675
Commands See ...
Commands See ...
clear <option> “Clearing statistics” on page 1034
rmon alarm <entry-number> <MIB-object.interface-num>
<sampling-time> <sample-type>
<threshold-type> <threshold-value> <event-number>
<threshold-type> <threshold-value> <event-number>
owner <text-string>
“Alarm (RMON group 3)” on page 1037
rmon event <event-entry> description <text-string> log |
trap | log-and-trap | owner <rmon-station>
“Event (RMON group 9)” on page 1037
To Next Page
Loading...
