Dell PowerConnect B-RX - Page 1154

1078 BigIron RX Series Configuration Guide
53-1002253-01
Displaying IP multicast information
41
To clear the learned IGMP flows for a specific IP multicast group, enter a command such as the
following.
BigIron RX# clear ip multicast group 239.255.162.5
The following example shows how to clear the IGMP flows for a specific group and retain reports for
other groups.
Syntax: clear ip multicast all | group <group-id>
The all parameter clears the learned flows for all groups.
The group <group-id> parameter clears the flows for the specified group but does not clear the
flows for other groups.
BigIron RX# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports 4/13
Multicast Group: 239.255.162.5, Port: 4/4 4/13
Multicast Group: 239.255.162.4, Port: 4/10 4/13
BigIron RX# clear ip multicast group 239.255.162.5
BigIron RX# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports 4/13
Multicast Group: 239.255.162.4, Port: 4/10 4/13