1300 BigIron RX Series Configuration Guide
53-1002253-01
Syslog messages
A
Alert OSPF LSA Overflow, LSA Type =
<lsa-type>
Indicates an LSA database overflow.
The <lsa-type> parameter indicates the type
of LSA that experienced the overflow
condition. The LSA type is one of the
following:
• 1 – Router
• 2 – Network
• 3 – Summary
• 4 – Summary
• 5 – External
Alert ISIS MEMORY USE EXCEEDED IS-IS is requesting more memory than is
available.
Alert MAC Authentication failed for <mac-address>
on <portnum> (Invalid User)
RADIUS authentication failed for the specified
<mac-address> on the specified <portnum>
because the MAC address sent to the RADIUS
server was not found in the RADIUS server’s
users database.
Alert MAC Authentication failed for <mac-address>
on <portnum>
RADIUS authentication was successful for the
specified <mac-address> on the specified
<portnum>; however, the VLAN returned in
the RADIUS Access-Accept message did not
refer to a valid VLAN or VLAN ID on the device.
This is treated as an authentication failure.
Alert MAC Authentication failed for <mac-address>
on <portnum> (No VLAN Info received from
RADIUS server)
RADIUS authentication was successful for the
specified <mac-address> on the specified
<portnum>; however, dynamic VLAN
assignment was enabled for the port, but the
RADIUS Access-Accept message did not
include VLAN information. This is treated as
an authentication failure.
Alert MAC Authentication failed for <mac-address>
on <portnum> (RADIUS given VLAN does not
match with TAGGED vlan)
Multi-device port authentication failed for the
<mac-address> on a tagged port because the
packet with this MAC address as the source
was tagged with a VLAN ID different from the
RADIUS-supplied VLAN ID.
Alert MAC Authentication failed for <mac-address>
on <portnum> (RADIUS given vlan does not
exist)
RADIUS authentication was successful for the
specified <mac-address> on the specified
<portnum>; however, the RADIUS
Access-Accept message specified a VLAN
that does not exist in the device’s
configuration. This is treated as an
authentication failure.
Alert MAC Authentication failed for <mac-address>
on <portnum> (Port is already in another
radius given vlan)
RADIUS authentication was successful for the
specified <mac-address> on the specified
<portnum>; however, the RADIUS
Access-Accept message specified a VLAN ID,
although the port had previously been moved
to a different RADIUS-assigned VLAN. This is
treated as an authentication failure.
TABLE 228 Brocade Syslog messages (Continued)
Message level Message Explanation
To Next Page
Loading...
