Dell PowerConnect B-RX - Page 1387

BigIron RX Series Configuration Guide 1311
53-1002253-01
Syslog messages
A
Notification OSPF virtual intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The <router-id> is the router ID of the device.
The <ip-addr> is the IP address of the
interface on the device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF originate LSA, rid <router-id>,
area <area-id>, LSA type <lsa-type>,
LSA id <lsa-id>,
LSA router id <lsa-router-id>
An OSPF interface has originated an LSA.
The <router-id> is the router ID of the device.
The <area-id> is the OSPF area.
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF max age LSA, rid <router-id>,
area <area-id>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
An LSA has reached its maximum age.
The <router-id> is the router ID of the device.
The <area-id> is the OSPF area.
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF LSDB overflow, rid <router-id>,
limit <num>
A Link State Database Overflow (LSDB)
condition has occurred.
The <router-id> is the router ID of the device.
The <num> is the number of LSAs.
Notification OSPF LSDB approaching overflow,
rid <router-id>, limit <num>
The software is close to an LSDB condition.
The <router-id> is the router ID of the device.
The <num> is the number of LSAs.
TABLE 228 Brocade Syslog messages (Continued)
Message level Message Explanation