EasyManua.ls Logo

Dell PowerConnect B-RX - Page 282

Dell PowerConnect B-RX
1458 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
206 BigIron RX Series Configuration Guide
53-1002253-01
Configuring forwarding parameters
7
FIGURE 11 Standard and null static routes to the same destination network
Figure 12 shows another example of two static routes. A standard static route and an
interface-based static route are configured for destination network 192.168.6.0/24. The
interface-based static route has a lower metric than the standard static route. As a result, the
device always prefers the interface-based route when the route is available. However, if the
interface-based route becomes unavailable, the device still forwards the traffic toward the
destination using an alternate route through gateway 192.168.8.11/24.
X
Two static routes to 192.168.7.0/24:
--Standard static route through
gateway 192.168.6.157, with metric 1
--Null route, with metric 2
Router A
Router B
192.168.6.188/24 192.168.6.157/24
192.168.7.7/24
192.168.7.69/24
When standard static route
is good, Router A uses that
route.
Router A
Router B
192.168.6.188/24 192.168.6.157/24
192.168.7.7/24
192.168.7.69/24
If standard static route is
unavailable, Router A uses
the null route (in effect dropping
instead of forwarding the packets).
Null

Table of Contents

Other manuals for Dell PowerConnect B-RX

Related product manuals