Diatron Abacus 5 - Principles of Operation

20
4 Installation
Your Diatron certified service engineer will perform the initial installation of the ‘Abacus 5’ analyzer and train
selected laboratory personnel on the proper use and maintenance of the analyzer. The ‘Abacus 5’ analyzer should
only be operated by properly trained laboratory personnel.
4.1 The ‘Abacus 5’ Analyzer Package Contents
After opening the ‘Abacus 5’ analyzer packaging, you will find an accessory box. The analyzer is in a plastic bag in
between cushioning protective material. After opening the bag, remove the desiccant packs. The package should
contain the following items:
 The ‘Abacus 5’ analyzer
 Accessories box on top of the analyzer, including:
o Power cord
o User Manual (this document)
o Sample tube adapter for the individual sample unit (1 pc)
o Reagent tube kit in a plastic bag, with 3 caps and 5 color-coded tubing
o Plastic waste container
o Cardboard box for the waste container
o “Preparing for shipment” tube kit (1 piece)
o ‘Abacus 5’ analyzer final check report
Please inform your Diatron Representative if any item is missing or damaged. Retain the original ‘Abacus 5’ analyzer
packaging for future transportation and storage.
4.2 The Autosampler Package Content
The Autosampler is an optional unit that attaches to the Abacus 5. If the optional Autosampler unit was ordered,
package should contain the following items:
 Autosampler unit
 A sample tray
 10 pieces sample racks
 Autosampler final check report
Please inform your sales representative if any item is missing or damaged. Retain the original Autosampler packaging
for future transportation and storage.