Diatron Abacus 5 - Graphical User Interface (GUI)

32
Avoid getting liquids on the electrical connectors. The rear panel of the analyzer should be cleaned with a cloth or
sponge with alcohol.
Serial # and manufacturing label:
5.3.3 Left Side Assembly
To access the left or right side assemblies, the side panels must be removed. Please refer to section 17.3 for
information about removing the side panels.
Pressure Sensors
Small Measure Buffer
Drain Buffer,
Mix, RBC & WBC
Chambers
Valves 1-22
Valves 23-44
Diluent Buffers
Diff-5p, Lyse-5p Buffers
Sheath Buffer
Figure 12. Left Side Assembly
 Pressure sensors measure the differential pressures of vacuum buffer for impedance base and optical
measurement and empty chamber process.
 Small Measure buffer is a vacuum buffer used for impedance measurement.
 Sheath buffer is a reservoir for Diatro•Dil-Diff diluent for optical measurements.