Diatron Abacus 5 - Start Automated Measurements; Access the Database; Initiate Printing; Main Menu

41
6.7.3 Start Automated Measurements
Tapping or clicking the ‘AS’ icon with the multiple sample tube graphic allows access to the following functions:
 Initiate automated measurements in one of three modes:
o Full scan mode
o Free list mode
o Selected samples mode
o Remote worklist mode
 Define sample parameters (the parameter list depends which one of the three sample modes are selected)
 Monitor the progress of the automated measurements
 View the details completed measurements
See section 8.4.2 for more information about automated measurements.
6.7.4 Access the Database
Tapping or clicking the ‘Database’ icon with the file cabinet graphic allows access to the following functions:
 Select completed and measurement stored as database records
 Export database records for storage or import results for viewing
 Delete database records
 Send database records to the LIS
 Review the details of selected measurements
See section 1 for more information about accessing and using the ‘Abacus 5’ database.
6.7.5 Initiate Printing
Tapping or clicking the ‘Print’ icon with the printer graphic will print the active panel or measurement result
according to the printer settings.
See section 15.6 for more information about printing on the ‘Abacus 5’ analyzer.
6.7.6 Main Menu
Tapping or clicking the ‘Menu’ icon with the main menu graphic displays and allows access to the main menu. The
main menu is automatically displayed when the ‘Abacus 5’ analyzer is started up. The main menu icons are arranged
in an intuitive and attractive circular design.