66
Figure 38 Figure 39. Preparing a Free List
As with the Full Scan mode, the Autosampler will scan all the sample positions on the tray and rows with missing
racks will be skipped. The Autosampler will only process tube types it recognizes with caps attached. The automated
mixing, aspiration, and analysis process is the same as the Full Scan Mode, and the progress can be followed in tray
or list view.
The main difference between the Free List mode and the Full Scan mode is that the Free List mode identifies samples
by matching them sequentially to the list, and comparing their measurement results to the normal range associated
with the sample mode selected for that sample.
Figure 40. Free List Mode Progress: List View
To Next Page
Loading...
