88
To archive database data using this function, insert a USB data storage device to one of the USB inputs on the
back panel of the ‘Abacus 5’ analyzer. Select the file location of your USB data storage device and click or tap the
‘OK’ button to begin the export.
See section 0 for detailed information on the format of the tab separated text file.
10.8.6 Save Raw Data
The save raw data function saves the raw data information associated with a selection of database records. Raw
data files are only suitable for internal use by Diatron staff. Your service engineer may ask you to save raw data
files to help diagnose a service issue.
A confirmation password is required to save raw data. The default factory-set confirmation password is 555. This
password can be changed only by a Diatron certified service engineer.
Insert a USB data storage device to one of the USB inputs on the back panel of the ‘Abacus 5’ analyzer. Click or
tap the ‘Save raw data’ button on the Manage records panel, then enter the correct confirmation password. Click
or tap the ‘Ok’ button to display a directory panel like Figure 58. Select the file location of your USB data storage
device and click or tap the ‘OK’ button to begin saving raw data.
10.8.7 Delete
The Delete function is used to delete records from a selection permanently from the ‘Abacus 5’ analyzer
database. To permanently delete records, select a group of records and click or tap the ‘Delete’ button on the
Manage records panel.
To prevent accidental deletion of data, the ‘Abacus 5’ requests the same confirmation password used in the save
raw data function. After entering the correct password and clicking or tapping the ‘Ok’ button, the records will be
permanently deleted.
The password to allow deleting records is: 555.
To Next Page
Loading...
