digico D5T - Page 165

Index
Note Off 5-10
Note On 5-9
Nudge Back / Forward 6-15
O
Off-line 4-21
Offset 6-4
On Screen Touch Keyboard 4-4
Only Display Name 2-18
Only Plays 6-5
Other Effects 7-3
Output Channel Routing 3-6
Output Insert 3-7, 7-5
Output Normalising 7-6
Output Processing (FX5 and FX6) 7-3
Over 3-3
Overview 2-21
Overview Setup 2-22
Overwrite 6-5
P
Pan 2-13
Pan / Aux Module 2-12
Paste 6-15
Paste Clip 6-5
Peak Hold 4-12
PFL 4-10
Phantom Power 2-7
Phase 2-8
Play (Update) Mode 6-3
Play From 5-8
Play mode 6-4
Play To 5-8
PPM Default 4-12
Presets 4-8
Preview 5-7
Program Change 5-10
Q
Quit To Windows 4-4
R
Real Time Automation 6-2
Real Time Automation Modes 6-2
Recalling a Cue 5-4
Receive Only 1-9
Record Mode 6-2
Recovery 4-12
Redundant Mirror Console B-7, B-15
Redundant Optical Loop B-7
Relative Trim 6-4
Relays 5-8
Rename 4-7
Rename File 4-7
Renaming a Cue 5-6
Replace Current 5-5
Replacing a Cue 5-5
Restart 4-12
Return 2-16
Reverb (FX1) 7-3
Round to whole dBs 4-4
Route to a Direct Output 1-11, 1-14, 1-15, 3-
9, 3-10
Route to a Group 1-11
Routing 2-14
Routing Busses To Outputs 1-12
S
Safe 2-18
Safe Mode 6-4, 6-12
Safe Scope 6-12
Sample Rate 4-23
Sample Rate Convertors 4-23
Save As New File 1-16, 4-8
Save Presets 4-8
Save Session 1-16, 4-8
Scaling the Automation Editor 6-9
Scope 2-24
Scope of Record and Play 6-4
Screen Brightness 4-4
Screen Scroll 1-18, 2-4, 2-12
Scrolling the Master Screen 3-3
Select Range 5-5
Select Signal 2-6
Selection Tools 6-13
Selector Tool 6-13
Send 2-16
Send Gain 2-16
Sessions Menu 4-6
Set All 1-13, 3-8
Set all Input Direct Sends 1-8, 4-7
Set Levels OFF 3-5
Set Levels to 0dB 3-5
Signal Group 2-6
Single 4-10
SIP 4-10
SMPTE (LTC) 4-21
Snap to Timeline 6-15
Solo 1-10, 2-17
Solo 1 or 2 4-10
Solo 2 Assign 4-10
Solo Assigns Channel 2-18
Solo Asssigns Aux To Faders 4-17
Solo Clear 4-11
Solo Options 1-21
Solo Safe 4-11
Solo Trim Level 4-11
Status LED 1-17
Stereo 1-10
Stereo Channel 2-6
Stereo Link 2-11
Storing a Cue 5-4
Sub 2-13
Sub Channel Dynamics 7-7
Sub Channel EQ 7-7
Surface Label Display Brightness 4-4
Surround Panning 2-13
Swap (Reverse) Left and Right Signals 2-7
Swap Channels 2-24
Switch All 3-5