Chapter 2
2-26
2.4.8 Channel Overview ................................................................
The Channel Overview panel in the Layout menu provides similar functions to the Channel Banks panel and a graphic representation
of all the consoles input channels. Many controls can be adjusted on screen using the mouse/trackball controls.
The coloured outlines represent the banks that are currently being viewed on the worksurface and this view can be changed by touching
the on screen banks. The Fader Banks can be named by touching their label and typing.
To clear a bank from the worksurface, hold down the relevant bank button on the worksurface and touch the on screen Clear Bank
button.
To assign a bank to the worksurface, hold down the relevant bank button on the worksurface and touch the on screen bank that you wish
to assign.
The Set 0dB and Set - oo buttons may be used to reset all or selected fader levels for the top and/or bottom row of channel faders.
To Select Channels, drag the mouse through the white boxes beneath the bank labels and release - the selected channels will be
highlighted in yellow.
If channels are selected, then the Copy and Move functions become available and pressing either of these buttons will open the relevant
panel with the source channels already selected.
Include Master Bank
in Overview Screen
Sets all or selected faders
to unity gain
Sets all or selected faders
to off
Touchhereandtypeto
name Bank
Hold Fader Bank button
andtouchheretoclear
fader bank from worksurface
Drag mouse through whit
boxes to select channels
To Next Page
Loading...
