EasyManua.ls Logo

Ducati SS 800 - Removing the rear mudguard; Refitting the rear mudguard

Ducati SS 800
544 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vestizione
Fairing
sezione / section
E 4
17 SuperSport 800 - M.Y. 2006 - edizione/edition 00
A
B
C
D
E
F
G
H
L
M
N
P
Smontaggio parafango
posteriore
Svitare la vite (12) di fissaggio
copricatena (10) al forcellone.
Svitare la vite (11) di fissaggio
copricatena (10) al parafango
posteriore (7).
Svitare le viti (8), recuperando le
rosette (9).
Rimuovere il parafango posteriore (7).
Rimontaggio parafango
posteriore
Posizionare il parafango posteriore
(7), impuntando le viti (8) con le
relative rosette (9).
Posizionare il copricatena (10) e
fissarlo con le viti (11) e (12).
Serrare le viti (8) alla coppia prescritta
(Sez. C 3).
Serrare la vite (12) e la vite (11) alla
coppia prescritta (Sez. C 3).
Operazioni Rif Sez.
Rimuovere la ruota
posteriore
G 4
Operazioni Rif Sez.
Rimontare la ruota
posteriore
G 4
Removing the rear
mudguard
Unscrew the screw (12) securing the
chain guard (10) to swinging arm.
Unscrew the screw (11) securing the
chain guard (10) to the mudguard (7).
Loosen screws (8), collect the
washers (9).
Remove the rear mudguard (7).
Refitting the rear
mudguard
Position the rear mudguard (7), start
the retaining screws (8) complete
with their washers (9) in their holes.
Install the chain guard (10) and secure
it with the screws (11) and (12).
Tighten the screws (8) to the
specified torque (Sect. C 3).
Tighten the screw (12) and screw (11)
to the specified torque (Sect. C 3).
Operations See Sect.
Remove the rear wheel G 4
Operations See Sect.
Refit the rear wheel G 4
11
12
10
7
8
8

Table of Contents

Related product manuals