Ducati SS 800 - Rear suspension; Hydraulic brakes; Charging system; generator

Caratteristiche tecniche
Specifications
sezione / section
C 1.1
13
A
B
C
D
E
F
G
H
L
M
N
P
SuperSport 800 - M.Y. 2006 - edizione/edition 00
Rear suspension
Hydraulic brakes
Charging system / generator
Reference Technical specifications
Type Progressive cantilever rear monoshock
with rebound and compression damping
and spring preload adjustment.
Shock absorber stroke 71 mm
Rear shock absorber Standard damping force setting.
Undo adjusters from the fully closed
position (turn clockwise).
6 clicks - rebound
25 clicks - compression
Wheel travel 136 mm
Reference Standard value Max. allowed value
FRONT
Brake disc Type Drilled twin disc
Thickness 4 ± 0.1 mm 3.6 mm (min.)
Material Steel
Diameter 320 mm
Braking surface 88 sq. cm
Brake caliper Make Brembo
Type 30/34 - 4 pistons
Caliper cylinder diameter 30/34 mm
Pads friction material FERIT I/D 450-FF
Brake master cylinder Type PS 16
Master cylinder diameter 16 mm
REAR
Brake disc Type Drilled disc
Thickness 4 ± 0.1 mm 3.6 mm (min.)
Material Steel
Diameter 245 mm
Braking surface 32 sq. cm
Brake caliper Make Brembo
Type 34 - 2 pistons
Caliper cylinder diameter 34 mm
Pads friction material FERIT I/D 450 FF
Brake master cylinder Type PS11
Master cylinder diameter 11 mm
Reference Technical specifications
Battery Voltage 12V
Capacity 10 Ah
Type Sealed, maintenance free
Generator Capacity 12V - 520 W