Ducati SS 800 - Page 75

Uso e manutenzione
Use and maintenance operations
sezione / section
D 3
11
A
B
C
D
E
F
G
H
L
M
N
P
SuperSport 800 - M.Y. 2006 - edizione/edition 00
Note
(1) Replace every two years, in any case
(2) Check for proper tightening of the following safety parts. If any components are not at the correct torque, please see
the Torque Settings tables (Sect. C 3).
- Engine to frame mounting bolt nut
- Front wheel nut
- Rear wheel nut
- Steering head screws
- Bottom yoke screws
- Handlebars securing screw
- Fork bottom end bolt
- Frame-to-shock absorber screw
- Swingarm shaft screw
- Front brake caliper retaining screw
- Front brake disc retaining screw
- Rear brake caliper retaining screw
- Rear brake disc retaining screw
- Rear brake retaining screw
- Fairing nuts
(3) Test the following parts:
- Wheel hub bearings
- Rear wheel flexible coupling
- Sprocket retaining plate
- Side stand
- Indicators and lighting devices