MAINTENANCE MENU
Eco Manual
202
Error Reporting
The default is On. The device reports any system errors that occur by describing the error in a
red box on your display. You will also see a box on your display that asks you to write down
what happened and report it to PRC. You are given instructions for continuing.
Battery Menu
See next page for details.
Shutdown Windows
This completely shuts down your ECO, just like the "shut down" command for your home
computer. This means it will take longer for the ECO to boot up when you press the I/O button.
Restart Windows
This gives you a way to restart Windows without having to go to the Start menu. You should
rarely have to use this.
Update Software
When software updates become available they will be placed on the PRC Web site as
downloadable files.
1. Plug your USB flash drive into your computer.
2. Go to
http://www.prentrom.com/downloads and click on the ECO category. Select the file
you want and download it to your computer's
desktop.
3.
Copy the downloaded file to your USB flash drive.
4. Turn on your ECO and
plug in the battery charger.
5. Go to the
MAINTENANCE MENU in the Toolbox and select the Reset to Factory
Defaults options.
6. When you have copied the ECO software upgrade from your computer to your USB, unplug
the USB from your computer and plug it into the ECO.
7. Go to the
MAINTENANCE MENU in the Toolbox and select the Update Software option.
8. The update takes place. When it is finished, remove your USB flash drive from the ECO.
9. You can unplug the battery charger once the ECO is running the new software.
Activate Windows
This option is only for use with the RESTORE DISK. If you have to use the Restore Disk to re-
install Windows
®
, you will be asked to select this option. It installs an unregistered copy of
Windows on your device. You have 30 days to register the application and you will receive
automatic reminders of this on your device until the 30 days elapse at which time you will no
longer be able to use Windows.
Do not use this option unless you are using the Restore Disk.
To Next Page
Loading...