Chapter 4
| System Management Commands
File Management
– 109 –
Default Setting
None
Command Mode
Privileged Exec
Command Usage
â—† If you enter the command dir without any parameters, the system displays all
files.
File information is shown below:
Example
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- ---------
Unit 1:
ECS4210-series_V1.0.0.4.bix OpCode N 2012-12-28 10:17:22 8924092
ECS4210-series_V1.0.0.5.bix OpCode Y 2012-12-28 10:48:45 8924092
Factory_Default_Config.cfg Config N 2012-12-28 14:20:26 455
startup1.cfg Config Y 2012-12-28 09:52:15 1539
-----------------------------------------------------------------------------
Free space for compressed user config files: 1462272
Console#
whichboot This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Table 16: File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Create Time The date and time the file was created.
Size The length of the file in bytes.
To Next Page
Loading...
Need help?
General
