Chapter 7
| Authentication Commands
Authentication Sequence
– 185 –
Example
This example sets the privilege level for the ping command to Privileged Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
show privilege This command shows the privilege level for the current user, or the privilege level
for commands modified by the privilege command.
Syntax
show privilege [command]
command - Displays the privilege level for all commands modified by the
privilege command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the privilege
command.
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
Authentication Sequence
Three authentication methods can be specified to authenticate users logging into
the system for management access. The commands in this section can be used to
define the authentication method and sequence.
Table 34: Authentication Sequence Commands
Command Function Mode
authentication enable Defines the authentication method and precedence for
command mode change
GC
authentication login Defines logon authentication method and precedence GC
To Next Page
Loading...
Need help?
General
