Chapter 22
| Multicast Filtering Commands
IGMP Snooping
– 554 –
clear ip igmp
snooping groups
dynamic
This command clears multicast group information dynamically learned through
IGMP snooping or MVR.
Syntax
clear ip igmp snooping groups dynamic
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though IGMP snooping or MVR. Statically
configured multicast address are not cleared.
Example
Console#clear ip igmp snooping groups dynamic
Console#
clear ip igmp
snooping statistics
This command clears IGMP snooping statistics.
Syntax
clear ip igmp snooping statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear ip igmp snooping statistics
Console#
To Next Page
Loading...
Need help?
General
