Chapter 23
| LLDP Commands
– 620 –
LLDP Port Information
Port PortID Type PortID Port Description
-------- ---------------- ----------------- --------------------------------
Eth 1/1 MAC Address 00-1A-7E-AC-2B-13 Ethernet Port on unit 1, port 1
Eth 1/2 MAC Address 00-1A-7E-AC-2B-14 Ethernet Port on unit 1, port 2
Eth 1/3 MAC Address 00-1A-7E-AC-2B-15 Ethernet Port on unit 1, port 3
Eth 1/4 MAC Address 00-1A-7E-AC-2B-16 Ethernet Port on unit 1, port 4
.
.
.
Console#show lldp info local-device detail ethernet 1/1
LLDP Port Information Detail
Port : Eth 1/1
Port Type : MAC Address
Port ID : 00-1A-7E-AC-2B-13
Port Description : Ethernet Port on unit 1, port 1
MED Capability : LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Extended Power via MDI - PD
Inventory
Console#
show lldp info
remote-device
This command shows LLDP global and interface-specific configuration settings for
remote devices attached to an LLDP-enabled port.
Syntax
show lldp info remote-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General
