Chapter 12
| Power over Ethernet Commands
– 380 –
show power
mainpower
Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
Example
Console#show power mainpower
Unit 1 PoE Status
PoE Maximum Available Power : 390 Watts
System Operation Status : On
PoE Power Consumption : 0 Watts
Software Version : Microsemi SDK V1.0.4
Console#
Power (mWatt) The maximum power allocated to this port (see power inline maximum
allocation)
Power (used) The current power consumption on the port in milliwatts
Priority The port’s power priority setting (see power inline priority)
Table 75: show power inline status - display description (Continued)
Field Description
Table 76: show power mainpower - display description
Field Description
PoE Maximum
Available Power
The available power budget for the switch
System Operation
Status
The current operating power status (displays on or off)
PoE Power
Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller subsystem in the switch.
To Next Page
Loading...
Need help?
General
