Edge-Core ECS4210-12P User Manual

Chapter 23 | LLDP Commands
– 616 –
Command Usage
This option advertises location identification details.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv location
Console(config-if)#
lldp med-tlv med-cap This command configures an LLDP-MED-enabled port to advertise its Media
Endpoint Device capabilities. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv med-cap
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises LLDP-MED TLV capabilities, allowing Media Endpoint and
Connectivity Devices to efficiently discover which LLDP-MED related TLVs are
supported on the switch.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv med-cap
Console(config-if)#
lldp med-tlv
network-policy
This command configures an LLDP-MED-enabled port to advertise its network
policy configuration. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv network-policy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)

Edge-Core ECS4210-12P Specifications

General

Brand	Edge-Core
Model	ECS4210-12P
Category	Network Router
Language	English

Summary

Section I Getting Started

Initial Switch Configuration

Information on connecting to the switch and basic configuration procedures.

Section II Command Line Interface

Using the Command Line Interface

Explains how to access and use the CLI, including console and Telnet connections.

Entering Commands

Details on entering CLI commands, including keywords, arguments, completion, and history.

CLI Command Groups

Categorizes system commands into functional groups like General, System Management, and SNMP.

Section III Appendices

Troubleshooting

Provides actions for common problems when accessing the management interface via Telnet, web browser, or serial connection.

Glossary

Defines key networking terms and acronyms used throughout the manual.