Chapter 22
| Multicast Filtering Commands
Multicast VLAN Registration
– 592 –
show mvr
associated-profile
This command shows the profiles bound the specified domain.
Syntax
show mvr [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
Default Setting
Displays profiles bound to all MVR domains.
Command Mode
Privileged Exec
Example
The following displays the profiles bound to domain 1:
Console#show mvr domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
show mvr interface This command shows MVR configuration settings for interfaces attached to the
MVR VLAN.
Syntax
show mvr [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
Default Setting
Displays configuration settings for all attached interfaces.
Command Mode
Privileged Exec
MVR Current Learned
Groups
The current number of MVR group addresses
MVR Upstream Source IP The source IP address assigned to all upstream control packets.
Table 122: show mvr - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General
