Edge-Core ECS4210-12P - Radius-Server Key

Chapter 7 | Authentication Commands
RADIUS Client
– 190 –
Default Setting
auth-port - 1812
acct-port - 1813
timeout - 5 seconds
retransmit - 2
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 port 181 timeout 10
retransmit 5 key green
Console(config)#
radius-server key This command sets the RADIUS encryption key. Use the no form to restore the
default.
Syntax
radius-server key key-string
no radius-server key
key-string - Encryption key used to authenticate logon access for client. Do
not use blank spaces in the string. (Maximum length: 48 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#
radius-server
retransmit
This command sets the number of retries. Use the no form to restore the default.
Syntax
radius-server retransmit number-of-retries
no radius-server retransmit
number-of-retries - Number of times the switch will try to authenticate
logon access via the RADIUS server. (Range: 1 - 30)