Edge-Core ECS4210-12P User Manual

Chapter 3 | General Commands
– 81 –
show reload This command displays the current reload settings, and the time at which next
scheduled reload will take place.
Command Mode
Privileged Exec
Example
Console#show reload
Reloading switch in time: 0 hours 29 minutes.
The switch will be rebooted at January 1 02:11:50 2001.
Remaining Time: 0 days, 0 hours, 29 minutes, 52 seconds.
Console#
end This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, VLAN Database
Configuration, and Multiple Spanning Tree Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
Console(config-if)#end
Console#
exit This command returns to the previous configuration mode or exits the
configuration program.
Default Setting
None
Command Mode
Any

Edge-Core ECS4210-12P Specifications

General

Brand	Edge-Core
Model	ECS4210-12P
Category	Network Router
Language	English

Summary

Section I Getting Started

Initial Switch Configuration

Information on connecting to the switch and basic configuration procedures.

Section II Command Line Interface

Using the Command Line Interface

Explains how to access and use the CLI, including console and Telnet connections.

Entering Commands

Details on entering CLI commands, including keywords, arguments, completion, and history.

CLI Command Groups

Categorizes system commands into functional groups like General, System Management, and SNMP.

Section III Appendices

Troubleshooting

Provides actions for common problems when accessing the management interface via Telnet, web browser, or serial connection.

Glossary

Defines key networking terms and acronyms used throughout the manual.