Chapter 17
| Address Table Commands
– 435 –
Command Mode
Privileged Exec
Example
Console#show mac-address-table movable-static
Interface Movable Static MAC Movable Static Action
--------- ------------------ ---------------------
Eth 1/ 1 Disabled None
Eth 1/ 2 Enabled None
Eth 1/ 3 Enabled None
Eth 1/ 4 Enabled None
Eth 1/ 5 Enabled None
.
.
.
show mac-address-
table sticky-dynamic
This command shows the sticky-dynamic configuration settings.
Syntax
show mac-address-table sticky-dynamic [[interface interface] |
[vlan vlan-id]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
vlan-id - VLAN ID (Range: 1-4094)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table sticky-dynamic
Interface Sticky dynamic MAC Sticky dynamic Action
--------- ------------------ ---------------------
Eth 1/ 1 Disabled None
Eth 1/ 2 Disabled None
Eth 1/ 3 Enabled None
Eth 1/ 4 Disabled None
Eth 1/ 5 Disabled None
.
.
.
To Next Page
Loading...
Need help?
General
