Chapter 17
| Address Table Commands
– 433 –
Eth 1/ 2 00-E0-29-94-34-64 1 Learn Delete on Timeout NA
Console#
show mac-address-
table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging Status : Enabled
Aging Time: 300 sec.
Console#
show mac-address-
table count
This command shows the number of MAC addresses used and the number of
available MAC addresses for the overall system or for an interface.
Syntax
show mac-address-table count interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table count interface ethernet 1/1
MAC Entries for Port ID : 1
Dynamic Address Count : 2
Total MAC Addresses : 2
Total MAC Address Space Available : 8192
Console#
To Next Page
Loading...
