Chapter 22
| Multicast Filtering Commands
Multicast VLAN Registration
– 595 –
The following example shows detailed information about a specific multicast
address:
Console#show mvr domain 1 members 234.5.6.7
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ------ --------
234.5.6.7 1 2(P)
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
show mvr profile This command shows all configured MVR profiles.
Command Mode
Privileged Exec
Example
The following shows all configured MVR profiles:
Console#show mvr profile
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
Table 124: show mvr members - display description
Field Description
Group Address Multicast group address.
VLAN VLAN to which this address is forwarded.
Port Port to which this address is forwarded.
Uptime Time that this multicast group has been known.
Expire The time until this entry expires.
Count The number of times this address has been learned by IGMP snooping.
To Next Page
Loading...
Need help?
General
