Chapter 23
| LLDP Commands
– 622 –
show lldp info
statistics
This command shows statistics based on traffic received through all attached LLDP-
enabled interfaces.
Syntax
show lldp info statistics [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
Command Mode
Privileged Exec
Example
Console#show lldp info statistics
LLDP Device Statistics
Neighbor Entries List Last Updated : 2450279 seconds
New Neighbor Entries Count : 1
Neighbor Entries Deleted Count : 0
Neighbor Entries Dropped Count : 0
Neighbor Entries Ageout Count : 0
Port NumFramesRecvd NumFramesSent NumFramesDiscarded
-------- -------------- ------------- ------------------
Eth 1/1 0 870 0
Eth 1/2 866 867 0
Eth 1/3 867 868 0
Eth 1/4 0 869 0
Eth 1/5 849 862 0
.
.
.
Console#show lldp info statistics detail ethernet 1/1
LLDP Port Statistics Detail
PortName : Eth 1/1
Frames Discarded : 0
Frames Invalid : 0
Frames Received : 12
Frames Sent : 13
TLVs Unrecognized : 0
TLVs Discarded : 0
Neighbor Ageouts : 0
Console#
To Next Page
Loading...
Need help?
General
