How to Use This Guide
– 5 –
◆ Added global command "ipv6 access-group" on page 329.
◆ Added global command "mac access-group" on page 335.
◆ Added mask parameter to the command "mac-vlan" on page 496.
◆ Documented new syntax for "set cos" on page 531.
◆ Documented new syntax for "set ip dscp" on page 532.
◆ Added description for "ip igmp authentication" on page 566.
April 2013 Revision
This is the first version of this guide. This guide is valid for software release
v1.0.0.12.
To Next Page
Loading...
