Actual flow direction
Setting of Sensor Flow
Direction Arrow
Flow rate value
Transmitter display Digital communications
Forward (same direction
as Flow arrow on sensor)
With Arrow Positive (no sign) Positive
Against Arrow Negative Negative
Reverse (opposite from
Flow arrow on sensor)
With Arrow Negative Negative
Against Arrow Positive (no sign) Positive
11.2 View and acknowledge status alerts
The transmitter posts a status alert whenever one of the specified conditions occurs. You can view active alerts
and you can acknowledge alerts. You do not have to acknowledge alerts. The transmitter will perform normal
measurement and reporting functions with unacknowledged alerts.
11.2.1 View and acknowledge alerts using the display
You can view information about all active or unacknowledged alerts, and you can acknowledge alerts.
The display uses the alert banner and the alert symbol ⓘ to provide information about alerts.
Table 11-1: Alert information on display
Display status Cause User action
Alert banner One or more alerts are
active.
Resolve the conditions to clear the alert. When the alert is
cleared or acknowledged, the banner will be removed.
Alert symbol ⓘ One or more alerts are
unacknowledged.
Acknowledge the alert. When all alerts are acknowledged,
the alert icon will be removed.
If alert security is enabled, the alert banner is never displayed. To view detailed information, you must use the
alert menu: Menu → (i) Alert List.
Note
Certain alerts do not clear until the transmitter is rebooted.
Procedure
• If the alert banner appears:
a) Activate Info to view information about the alert.
b) Take appropriate steps to clear the alert.
c) Activate Ack to acknowledge the alert.
• If ⓘ appears:
a) Choose Menu → (i) Alert List.
b) Select an alert to view more information about the specific alert or to acknowledge it individually.
c) Choose Acknowledge All Alerts to acknowledge all alerts on the list.
Transmitter operation Configuration and Use Manual
May2024 MS-00809-0200-1600
126 Emerson.com
To Next Page
Loading...
