Emerson Micro Motion 1600 - Drive Over Range; Electronics Failed; Event Active; Extreme Primary Purpose Variable

Table 7-4: Configuration Warning conditions (continued)
Name Ignorable
Transmitter Software Update Failed Yes
Drive Over Range
Default severity: Maintenance
Severity configurable: Yes
Fault Timeout applicable: Yes
Table 7-5: Drive Over-Range conditions
Name Ignorable
[102] Drive Overrange Yes
Electronics Failed
Default severity: Failure
Severity configurable: No
Fault Timeout applicable: No
Table 7-6: Electronics Failed conditions
Name Ignorable
[018] EEPROM Error (Transmitter) No
[019] RAM Error (Transmitter) No
Watchdog Error No
Event Active
Default severity: Out of Speculation
Severity configurable: Yes
Fault Timeout applicable: Yes
Table 7-7: Event Active conditions
Name Ignorable
Enhanced Event [1 - 5] Active Yes
Event [1 - 2] Active Yes
Extreme Primary Purpose Variable
Default severity: Failure
Severity configurable: Yes
Fault Timeout applicable: Yes
Table 7-8: Extreme Primary Purpose Variable conditions
Name Ignorable
[005] Mass Flow Rate Overrange No
[008] Density Overrange No
Configuration and Use Manual Configure device options and preferences
MS-00809-0200-1600 May2024
Configuration and Use Manual 93