Totalizer logs and configuration files
If you restore the factory configuration or upload a configuration file, the totalizer log is not affected.
Example: Totalizer log
================================================================================
Device UID: 22729F1F Device Tag: SUPPLY
Name Value Units Time Zone: GMT-7.00
================================================================================
Mass Fwd Total 61.74707 grams 9/12/2020 20:00
Mass Fwd Inv 61.74705 grams 9/12/2020 20:00
Mass Fwd Total 61.74707 grams 9/12/2020 21:00
Mass Fwd Inv 61.74705 grams 9/12/2020 21:00
Mass Fwd Total 61.74707 grams 9/12/2020 22:00
Mass Fwd Inv 61.74705 grams 9/12/2020 22:00
Mass Fwd Total 61.74707 grams 9/12/2020 23:00
Mass Fwd Inv 61.74705 grams 9/12/2020 23:00
Mass Fwd Total 61.74707 grams 9/13/2020 0:00
Mass Fwd Inv 61.74705 grams 9/13/2020 0:00
…
Note
The totalizer history displays only in English.
Read contract totals
You can read contract totals for the current 24-hour contract period and for the previous 24-hour contract
period. Depending on the configuration of the totalizer log, you may be able to read contract totals for earlier
periods.
The contract totals are derived from existing inventories. However, they are reset automatically at the
beginning of each contract period. Therefore, the values shown will probably not match the values shown
for the inventories.
Important
You can reset inventories manually, and you can stop and start inventories manually. However, if you do this,
data for the current contract period will not reflect the entire 24-hour period. Data for earlier contract periods
is not affected.
• The contract totals for the current contract period are stored in the Today's Total [1-4] parameters.
• The contract totals for the previous contract period are stored in the Yesterday's Total [1-4] parameters.
• The contract totals from earlier contract periods can be read in the totalizer log if configured.
Configuration and Use Manual Log files, history files, and service files
MS-00809-0200-1600 May2024
Configuration and Use Manual 169
To Next Page
Loading...
