Emerson Micro Motion 1600 - 4.8 Configure Velocity Measurement Unit; 4.8.1 Options for Velocity Measurement Unit

Unit description
Label
Display ProLink III Field communicator
Atmospheres atm atms atm
4.8 Configure Velocity Measurement Unit
Display Menu → Configuration → Process Measurement → Velocity → Units
ProLink III Device Tools → Configuration → Process Measurement → Velocity → Unit
Field communicator Device Settings → Process Configuration → Optional Setup → Velocity → Velocity Unit
Velocity Measurement Unit controls the measurement unit used to report velocity.
Procedure
Set Velocity Measurement Unit to the desired unit.
Default: m/sec
4.8.1 Options for Velocity Measurement Unit
The transmitter provides a standard set of measurement units for Velocity Measurement Unit. Different
communications tools may use different labels.
Unit description
Label
Display ProLink III Field communicator
Feet per minute ft/min ft/min ft/min
Feet per second ft/s ft/sec ft/s
Inches per minute in/min in/min in/min
Inches per second in/s in/sec in/s
Meters per hour m/h m/hr m/h
Meters per second m/s m/sec m/s
Configure process measurement Configuration and Use Manual
May2024 MS-00809-0200-1600
46 Emerson.com