Emerson Micro Motion 1600 - Configure contract totals into the totalizer log; 15.2 Generate service files

Configure contract totals into the totalizer log
The transmitter can be configured to store contract totals to the totalizer log. This allows you to access totals
from earlier contract periods. Otherwise, the transmitter maintains data for only the current contract period
(today) and the immediately preceding contract period (yesterday).
Procedure
1. Navigate to the Totalizer Log.
Option Description
Display Menu → Configuration → Totalizer Log
ProLink III Device Tools → Configuration → Totalizer Log
Field communicator Not available
2. Set Log Total 1, Log Total 2, Log Total 3, and/or Log Total 4 to the desired contract total.
You can configure the totalizer history log to include both Advanced Phase Measurement and standard
totals.
15.2 Generate service files
The transmitter automatically saves several types of service data that is useful in troubleshooting, device
maintenance, and administration. You can view the data by using ProLink III to generate a service file and then
clicking on the ProcessViz button to view the data, or by using your PC to open the file.
Prerequisites
If you use the first option from step 1, the service port must be enabled. It is enabled by default. However, if
you need to enable it, choose Menu → Configuration → Security and set Service Port to On.
Note
It may take as long as 10 minutes to generate a service file.
Procedure
1. WARNING
If the transmitter is in a hazardous area, do not remove the housing cover while the transmitter is
powered up. Failure to follow these instructions can cause an explosion, resulting in serious injury or
death.
Perform one of the following tasks:
Option
Description
Service port Use the USB-C cable to connect to the service port.
2. From ProLink III , select Device Tools → File Transfer → Download Service Files.
3. Click on Download all files. This could take 10 to 15 minutes.
4. If you know which files you would like to download, click Show Additional Options and select the service
files that you want to generate.
Log files, history files, and service files Configuration and Use Manual
May2024 MS-00809-0200-1600
170 Emerson.com