• Left pickoff (filtered) (V)
• Right pickoff (filtered (V)
• Left pickoff (raw) (V)
• Delta T
• Case temperature (°C)
• Voltage applied to the core processor (V)
• Temperature of the core processor board (°C)
• Temperature of the transmitter electronics (°C)
Historian data and power-cycles
Historian data is maintained across transmitter reboots and power-cycles.
Historian data and configuration files
If you restore the factory configuration or upload a configuration file, existing historian data is not affected.
Example: Historian log, 5-minute average data
S TAG:SUPPLY UID:22729F1F
SW:000000045 800:000000402
MassFlow MassFlow MassFlow MassFlow …
DST ON:Mountain GMT-7.0 SM:T075
SN:000000000
kg/s Max kg/s Min kg/s Avg kg/s Std …
8/25/2020 9:58 0.0082359 0 0.00091223 9.76E-05 …
8/25/2020 10:03 0.001018 0.00084441 0.00091756 1.61E-05 …
8/25/2020 10:08 0.00099489 0.00086279 0.00092519 1.44E-05 …
8/25/2020 10:13 0.0010835 0.00080879 0.00093774 2.01E-05 …
8/25/2020 10:18 0.0011767 0.00084206 0.00094224 2.11E-05 …
8/25/2020 10:23 0.0010243 0.00086888 0.00094534 1.85E-05 …
8/25/2020 10:28 0.0010903 0.00084823 0.00094747 1.81E-05 …
8/25/2020 10:33 0.0010319 0.00085327 0.00095123 1.67E-05 …
8/25/2020 10:38 0.0011232 0.00088614 0.00095222 1.59E-05 …
8/25/2020 10:43 0.0010841 0.00081306 0.00095126 1.99E-05 …
8/25/2020 10:48 0.0010999 0.00086106 0.00095333 1.93E-05 …
8/25/2020 10:53 0.0011523 0.00085537 0.00095528 2.01E-05 …
…
Note
The historian log displays only in English and the .csv file saves everything in base engineering units of
kg/sec, l/s, deg C, g/cc, bar and m/s. Time is saved in UTC time.
Configuration and Use Manual Log files, history files, and service files
MS-00809-0200-1600 May2024
Configuration and Use Manual 167