5. If you make a menu choice that requires entering a numeric value or character string, the display
provides a screen similar to the following:
Figure A-4: Numeric values and character strings
• Activate ⇦ or ⇨ to position the cursor.
• Activate ⇧ and ⇩ to scroll through the values that are valid for that position.
• Repeat until all characters are set.
• Activate and hold ⇨ to save the value.
6. To exit the display menu system, use either of the following methods:
• Wait until the menu times out and returns to the display variables.
• Exit each menu separately, working your way back to the top of the menu system.
Configuration and Use Manual Using the transmitter display
MS-00809-0200-1600 May2024
Configuration and Use Manual 225
To Next Page
Loading...
